D+ SBR 110

Form of Chemical	Liquid
Packaging Size	200g, 500gm, 1kg ,5kg , 10kg, 20kg
Usage/Application	Construction Repairs and Waterproofing
Category	Waterproofing Coating
Brand:	D+
Country of Origin	Made in India

D+SBR   is basically styrene-butadiene latex. It is designed for use in cement-latex compositions. It has good mechanical stability properties and a long-term non-foaming behaviour. It also passes the freeze-thaw cycle stability test. It gives very high resistance to the penetration of water into the cement admixture, which gives better ageing. It highly reduces the water-cement ratio thereby increasing the compressive strength of the mortar.
Application Procedure:
• First wet down the surface thoroughly. For preparing bond coat, mix 1kg Polybond SBR with 0.5 to 1 kg cement to form a lump-free consistency. This slurry can then be applied by brush on the surface.
• Within 10 minutes of application of bond coat, the polymer mortar should be applied.
• Curing should be done for 2-3 days.
Applications:
• Extensively used to make polymer modified repair mortar for RCC repair. Used for bond coat between old and new concrete. Even used for grouting applications.
Uses:
• In repair mortars/concretes
• All waterproofing mortars/ concretes
• Waterproof Coatings